![background image](http://html.mh-extra.com/html/allo-com/analog-gateway/analog-gateway_user-manual_2903734033.webp)
ANO
Analog Gateway User Manual
2 &y
www.allo.com
Version 2.0
33
Figure 24: General Preferences
General Preferences
Global Outbound CID
Configure the global CallerID used for all outbound calls when no other
CallerID is defined with higher priority. If no CallerID is defined for
extension or trunk, the global outbound CID will be used as CallerID.
Global Outbound CID Name
Configure the global CallerID Name used for all outbound calls. If
configured, all outbound calls will have the CallerID Name set to this
name. If not, the extension's CallerID Name will be used.
Ring Timeout
Configure the number of seconds to ring an extension, The default setting
is 20.
VOIP Phone Digit Map
: This option allows the administrator to define a global digit mapping
string compatible with RFC 3435. There is no default setting and this option does not sync with
the dial plan assigned to an individual user. The following examples should assist in writing an
acceptable digit mapping string.
[2-9]11 - Where calls beginning with digits from 2, 3, 4…. 9 followed by 11 are
dialed immediately.
0T - Where calls beginning with the digit 0 followed by a pause equal to the "Digit
Timeout" option.