ANO
Analog Gateway User Manual
2 &y
www.allo.com
Version 2.0
54
Figure 47: Create New SIP Trunk
3.
Select context naming based on username it will create context based on the username
4.
Provider name:
Give an unique name for this trunk
5.
Hostname:
Add the IP address of the VoIP trunk service provider of IPPBX
6.
Host port:
Enter the default SIP port: 5060
7.
Username:
It would be the user account ID provided by your service provider or IPPBX
8.
Password:
It authenticates the user account provided by VoIP service provider or IPPBX.
9.
DID routing:
Enable DID Routing if you are accepting DID numbers through this SIP
trunk. Once you enable this DID Routing, all calls will route to DID Routing table.
10.
Once check the Registration box, to send the registration request to a VoIP service
provider or IPPBX.
11.
Click Save and Apply Changes.
4. How to create outgoing call rule creation in Analog Gateway?
1.
Open GUI of the Analog card and go to Outgoing Calling Rules
2.
Click “New Ruling Rule”