![background image](http://html.mh-extra.com/html/allo-com/analog-gateway/analog-gateway_user-manual_2903734039.webp)
ANO
Analog Gateway User Manual
2 &y
www.allo.com
Version 2.0
39
•
NEVER = Never attempt NAT mode or RFC3581 support
•
ROUTE = Assume NAT, don't send report.
Allow RTP Reinvite
If enabled, the Gateway will try to redirect the RTP media stream (audio) to go
directly from the caller to the Callee.
• Yes : Allow RTP media direct
• No NAT: Allow media path redirection (Reinvite) but only when the peer is
not being behind NAT. The RTP core can detect if the peer is behind NAT or
not based on the IP address where the media comes from.
• Update: Use UPDATE for media path redirection, instead of INVITE.
Some devices do not support this (especially if one of them is behind
NAT).
5.3.4 Misc
Navigation:
General Settings > SIP settings > Misc:
This is where you can configure the
miscellaneous SIP settings.
Figure 29: Misc
The details to be filled are given as: