![background image](http://html.mh-extra.com/html/allo-com/analog-gateway/analog-gateway_user-manual_2903734034.webp)
ANO
Analog Gateway User Manual
2 &y
www.allo.com
Version 2.0
34
+011xxx.T - Where calls beginning with the + character, followed by 011 digits and
then at least three more digits before any arbitrary number is matched, dialed
after Digit Timeout is reached.
0[2-9]xxxxxxxxx - Where calls beginning with 0, followed by any digit from
2,3,4…9, followed further by 9 more digits are dialed immediately.
+1[2-9]xxxxxxxx - Where calls beginning with the + character, followed by 1,
followed by any digit from 2,3,4…..9, followed by 8 more digits are dialed
immediately.
[2-9]xxxxxxxxx - Where calls beginning with any digit from 2,3,4….9, followed by 9
more digits are dialed immediately.
[2-9] xxxT - Where calls beginning with any digit from 2, 3, 4….9, followed by
three more digits are dialed after Digit Timeout is reached.
[2-9]11|0T|+011xxx.T|0 [2-9]xxx1[2-9]xxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT
where each entry is separated by the | character. For more information, please
refer to RFC 3435.
VOIP Phone Digit Timeout
: The timeout variable is the number of seconds the phone will wait
for each segment of a digit map expressed as an integer.
5.2.2 Gateway Settings
Navigation:
Admin Settings >General settings > GATEWAY Settings
: This is where you can
configure the General Settings of the Gateway
Change Admin Password:
Enter the new password and retype the new password to confirm. The new password
field has to be at least 4 characters
Click on “Update” and the user will be logged out.
Once the web page comes back to the login page again, enter the new password to
login.
Date &Time Settings:
You can set the date and time of the Gateway either through Enabling NTP
or by manual entry. If you are enabling NTP, select the time zone according to your country
timing and enter the NTP server details.
Enable NTP
Enabling NTP allows you to set the Time zone and Date based on the NTP server
provided
Time Zone
Select the proper time zone option so the Gateway can display the correct time