ANO
Analog Gateway User Manual
2 &y
www.allo.com
Version 2.0
36
Figure 26: General SIP Settings
General
Bind UDP Port
Configure the UDP port used for SIP. The default setting is 5060.
Bind IP Address
Configure the IP address to bind to. The default setting is 0.0.0.0, which
means binding to all addresses.
Enable DNS SRV lookups
Select to enables DNS SRV lookups on outbound calls from the Gateway
.
5.3.2 TOS
Navigation:
General Settings
>
SIP Settings > TOS
: This is where you can configure the TOS sip
settings.
Figure 27: TOS