Allnet ALL2285 User Manual Download Page 58

Page: 58 / 63

2.4.7

WDR Function

The WDR Function Setting can be found under this path:

Camera> WDR

Function

The Wide Dynamic Range (WDR) function is for solving high contrast or

changing light issues so that enhances better video display. The WDR is

adjustable from Low, Mid to Hi. Higher level of WDR represents wider dynamic

range, so that he IP Camera can catch a greater scale of brightness. Click on

<√

> to confirm the new setting.

2.4.8

Noise Reduction

The Noise Reduction Setting can be found under this path:

Camera> Noise

Reduction

. .

The IP Camera provides multiple <Noise Reduction> options for delivering

optimized image quality especially in extra low-light conditions.

Different level options for 3D Noise Reduction (3DNR) include Low, Mid and

High. Higher level of 3DNR generates relatively enhanced noise reduction.

The proprietary Smart Picture Quality (SPQ) video processing method could

drastically minimum motion blur and reduce noise especially in low-light

environment. The combination of SPQ and 3DNR at different level further yields

exceptional video performance in various conditions.

The Noise Reduction function is configurable with the following options: 3DNR

Low, 3DNR Mid, 3DNR Hi, SPQ, SPQ + 3DNR Low, SPQ + 3DNR Mid, to SPQ

+ 3DNR Hi.

Click on

< √ > to confirm the new setting.

2.4.9

TV System Setting

The TV System Setting can be found under this path:

Camera> TV System

Select the video format that matches the present TV system. Click on

< √ > to

confirm the new setting.

Summary of Contents for ALL2285
































































Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands

Allnet ALL2285, User Manual

Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands