Allnet ALL2285 User Manual Download Page 4

Page: 4 / 63

Overview

The IP Camera is provided with a user-friendly browser-based configuration

interface, and a free bundled CMS (Central Management S ystem) for video

playback and recording. In this manual, information about main page

introduction, system related settings and camera settings will be described in

detail. For further information about CMS, please refer to CMS U

ser’s Manual.

Menu Tree

There are six main tabs including <Home>, <System>, <Streaming>, <Camera>,

<Pan Tilt> and <Logout> on the Home Page.

Home

Users can monitor live video of the targeted area.

System setting

The administrator can set host name, system time, root password, network

related settings, etc. Further details will be interpreted in chapter

System

Streaming setting

The administrator can modify video resolution and rotate type and select audio

compression mode in this page.

Camera setting

Users can adjust various camera parameters, including <Exposure>, <White

Balance>, <Picture Adjustment>, <Backlight>, <Digital Zoom>, <IR Function>,

<WDR Function>, <Noise Reduction> and <TV System>.

Pan Tilt setting

Users can activate the pan/ tilt function and select the RS-485 protocol which

the Pan Tilt Head uses in the <Pan/ Tilt Control> page.

NOTE:

Pan Tilt function is only available for 10x/ 18x Zoom AF IP

Camera and Box Camera. (DC12V/ AC24V/PoE Model)

Logout

Click on the tab to re-login the IP Camera with another username and

password.

Summary of Contents for ALL2285
































































Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands

Allnet ALL2285, User Manual

Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands