Allnet ALL2285 User Manual Download Page 47

Page: 47 / 63

2.3

Streaming

Under the tab <

Streaming

>, there are submenus including: <Video Format>,

<Video Compression>, <Video ROI>, <Video OCX Protocol>, <Video Frame

Rate>, <Video Mask>, and <Audio>.

In the Streaming submenus, the Administrator can configure specific video

resolution, video compression mode, video protocol, audio transmission mode,

etc. Further details of these settings will be specified in the following sections.

2.3.1 Video Format (Video Resolution and Rotate Type)

The Video Format setting can be found under this path:

Streaming> Video

Format

Video Resolution

Under Video Resolution section, the available video resolution formats are

including MJPEG and H.264. Please refer to the User

’s Manual for more

combination details.

Click on <Save> to confirm the setting.

Text Overlay Settings

Users can select the items to display data including date/time/text on the live

video pane. The maximum length of the string is 20 alphanumeric characters.

Click on <Save> to confirm the Text Overlay setting.

Video Rotate Type

Users can change video display type if necessary. Selectable video rotate types

include Normal, Flip, Mirror, 90 degree clockwise, 180 degree rotate and 90

degree counterclockwise.

The following is descriptions for different video rotate type.



Flip

If select <Flip>, the image will be rotated vertically.



Mirror

If select <Mirror>, the image will be rotated horizontally.

Summary of Contents for ALL2285
































































Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands

Allnet ALL2285, User Manual

Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands