Allnet ALL2285 User Manual Download Page 31

Page: 31 / 63



Send HTTP notification

Check this item, select the destination HTTP address, and specify the

parameters for event notifications by <Motion Detection> triggered.

When an alarm is triggered, the notification can be sent to the specified

HTTP server.

For instance, if the custom parameter is set as

”

action=1&group=2

”, and

the HTTP server name is

”

http://192.168.0.1/admin.php

”, the notification

will be sent to HTTP server as

”

http://192.168.0.1/admin.php?

action=1&group=2

” when alarm is triggered.

File Name

Enter a file name in the blank, ex. image.jpg. The uploaded image’s file name

format can be set in this section. Please select the one that meets your

requirements.



Add date/time suffix

File name: imageYYMMDD_HHNNSS_XX.jpg

Y: Year, M: Month, D: Day

H: Hour, N: Minute, S: Second

X: Sequence Number



Add sequence number suffix (no maximum value)

File name: imageXXXXXXX.jpg

X: Sequence Number



Add sequence number suffix up to # and then start over

File Name: imageXX.jpg

X: Sequence Number

The file name suffix will end at the number being set. For example, if the
setting is up to “10,” the file name will start from 00, end at 10, and then

start all over again.



Overwrite

The original image in the FTP site will be overwritten by the new

uploaded file with a static filename.

Summary of Contents for ALL2285
































































Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands

Allnet ALL2285, User Manual

Search results

Summary of Contents for ALL2285

Reviews:

Related manuals for ALL2285

Brands by name

Popular brands