ALL126AS3
USER’S MANUAL
61
4.6.2
Auto Detect Setting
Auto detect feature is a fully automatic way to find and configure VC channel or VLAN channel for active WAN PHY of the device and
WAN protocol for the same (either PPPoE/DHCP).
User has to provide pool of VC channels or VLAN channels which will be probed one by one sequentially and upon successful
detection of a channel, WAN protocol probing will be done and configured in the device.
To configure the
Auto Detect Config
, click
Auto Detect Config
(
WAN > Auto Detect Config
) on the left navigation bar. A
screen is displayed as shown in
Figure 4.6.2
Summary of Contents for ALL126AS3
