ALL126AS3
USER’S MANUAL
18
And the table shows the description. (
Table 3-2
)
Table 3-2
Description of the router rear connectors
Connectors
Type
Description
Reset
Tact switch Button
The reset buttons allows users to reboot the VDSL2 or load the default
settings.
Press and hold for 1-5 seconds: Reboot the VDSL2 Router
Press over 5 seconds: Load the default settings
Power
DC Power Jack
External Power Adapter: Input: AC 85~240Volts/50~60Hz
Output: DC 12V/1A
Line
RJ-11/Terminal Block
For connecting to a VDSL2 device. (
Do not
use RJ11 and Terminal
Block at the same time.)
Phone
RJ-11
For connecting to the POTS equipment or ISDN router
Gigabit Ethernet
(E1-E4)
RJ-45
For connecting to an Ethernet equipped device.
Link (WAN)
RJ-11/Terminal Block
For connecting a VDSL2 bridge. (
Do not
use RJ11 and Terminal Block
at the same time.)
CONSOLE
RS-232
For connecting a PC with RS-232 serial port over a D-SUB Cable
Summary of Contents for ALL126AS3
