ALL126AS3
USER’S MANUAL
47
4.3.9 Reset
To reboot the system, click
Reset
link (
System > Reset
) on the left navigation bar. A screen is displayed as shown in
Figure 4.3.9
Figure 4.3.9 Reset
Click Reset to reboot the system. This does not change the configurations existing in system.
Click Factory Reset to reset the device configuration to factory defaults configuration. This operation will result in saving the
current configuration and reverted back to factory shipped configuration.
When
Reset
or
Factory Reset
is clicked, a confirmation message is displayed as shown in
Figure 4.3.9.1
Figure 4.3.9.1 Reset Confirmation Message
Summary of Contents for ALL126AS3
