ALL126AS3
USER’S MANUAL
100
4.7 Select
“LAN”
When connecting the ALL126AS3 to a new control PC, one may want to go through the following steps in order to make the IP
address previously set by ifconfig in the console or on some later occasion, one may want to change it again without using the
console, then the menu below will be helpful. In order to set the IP address,
click on “LAN Settings”. You can view
LAN
in the left
navigation bar for LAN related settings.
Select the “LAN”. The menu below includes the sub-menus of
LAN ARP List
,
LAN Settings
,
UPnP Devices
,
LAN Switch
Port Setting
,
LAN Port Status
,
VLAN Settings
. A screen is displayed as shown in
Figure 4.7.
Figure 4.7 LAN options
Summary of Contents for ALL126AS3
