Allmatic BIOS1 24V, Manual, Page: 29 / 120

9/20 6-1622400 rev. 8 19/01/2022
DISPLAY
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS





DISPLAY
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS





DISPLAY
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS





DISPLAY
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS





DISPLAY
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS





ENG
ITA ENG FRA ESP NLD TUR
6 - REMOTE CONTROL LEARNING
The learning of a transmitter can be enabled with the “UP” button of the control unit or with the hidden key of a transmitter already memorized.
The BIOS1 24V control unit can memorize up to 4 functions in as many keys of the remote control. During the learning procedure, described at
paragraph 6.1, a single key is stored. So, it will be necessary to carry out up to 4 learnings for the assignment of all possible functions.
The functions will be assigned following the order below:
1. 1st memorized key: STEP-BY-STEP function.
2. 2nd memorized key: PARTIAL OPENING function.
3. 3rd memorized key: OPEN function.
4. 4th memorized key: CLOSE function.
6.1 - LEARNING OF A TRANSMITTER
1.
Make sure that the board is out from any programming menus.
To quit, press briefly the “MENU“ button until the display shows the state of
the control unit.
2.
Press and release the “UP” button. The display shows rad and the blinker will
be turned on with a fixed light.
3. Press the key of the remote control to be memorised within 10 seconds.
4.
If the memorisation has been successful, the display shows
don
or
fnd
(transmitter already memorized).
or
5.
After 2 seconds the display will show the memory location of the memorized
transmitter (for example 235 ).
6.
To memorise another key of the remote control (or a new transmitter), repeat
the procedure from the point 2.
WARNING - after 10 seconds of inactivity, the control unit exits from the learning phase (the display shows
tout
).
Blinker
Fixed light
DISPLAY
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS





DISPLAY
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS
UP DOWN
MENU
SS




