Not for
Reproduction
42 ALLMAND.COM
5. Periodic Inspection
5-4
5.4 Maintenance Items
5.4.1 Change Engine Oil
Every 250 Hours
When checking, replenishing, and draining the engine oil, be sure to wait more than 10 minutes after
engine stops to allow it to cool down.
<Procedure>
1. Remove the engine oil filler port cap [C], and remove the drain plug [A] fixed outside, and then open the
drain valve [B] fixed inside to drain oil.
2. After draining completed, close the drain valve [B] and install the drain plug [A] remove the engine oil filler
port cap [C], refill new engine oil.
[Oil supply: about 9L]
3. After finishing the oil supply, tighten the cap of engine oil filler port firmly.
4. Make sure to check engine oil level with the engine oil level gauge before start the unit.
5. After finishing the oil supply, tighten the cap of engine oil filler port firmly.
A180798
H990432
Caution in filling or draining engine oil
Engine oil is very hot and highly pressurized during or just after
the operation. Hot oil could blow out and can cause injury
Never supply more engine oil than the proper level. Too much oil
could cause white smoke out of the exhaust, and it can cause
damage and accident to engine.
A B
C
Summary of Contents for Maxi-Power MP25 T4F
Page 59: ...N o t f o r R e p r o d u c t i o n 59 7 Specifications 7 3 Unit mm A180871E units mm...
Page 63: ...N o t f o r R e p r o d u c t i o n 63 7 Specifications 7 7 7 5 Piping Diagram A180872E...
Page 66: ...N o t f o r R e p r o d u c t i o n 66 ALLMAND COM...
