Allmand Maxi-Power MP25 T4F, Operator'S Manual

Page: 40 / 68

Not for
Reproduction
40 ALLMAND.COM
5. Periodic Inspection
5-2
5.2 Maintenance Schedule
Such items marked ○ shall be carried out by customers. For the following items or clauses marked ●,
contact your nearest dealer because they require expert technical knowledge on them.
The following table shows the intervals of inspection and maintenance under normal operation conditions.
Inspection and maintenance should be done at either of the hour or the period mentioned in the remarks
column, whichever comes earlier.
(This table is a guide only, it is not a guaranteed time. Please change maintenance interval according to
usage load environmental condition.)
Maintenance Daily
Every
250
hours
Every
500
hours
Every
1,000
hours
Ref. Remarks
Generator
Clean instruments in control panel
○
3-10 Clean as required.
Check thermo label of alternator
○
3-13
Check control panel
○
3-18
Check GFCI receptacles
○
5-8 Every 1 month
Check insulation resistance
○
5-9 Every 2 months
Check thermo label on the generator
○
5-10 Every 2 months
Engine
related
Check engine oil level
○
3-9
Check coolant level
○
3-10
Check fuel
○
3-11
Check fuel filter drain
○
3-11
Check belt tension
○
3-12 In the case of NG,
it exchanges.
Change engine oil
○
5-4
Change engine oil filter element
○
5-5
Check battery electrolyte
○
5-5
Check and clean air filter elements
○
5-7
Check accumulations in exhaust
system
○
5-8
Drain fuel tank
○
5-10
Check specific gravity of battery
electrolyte.
○
5-5
Change fuel filter element
○
5-11
Clean outside of radiator
○
5-11 Clean as required.
Clean fuel air bleeding pump filter
○
5-11
Check and cleaning of the supply
pump strainer
○
5-12
Check exhaust flexible pipe
○
5-13 Every 4 months
Change air filter element
○
5-13
Change coolant (LLC)
○
(Every
2 years)
5-15
Clean fuel tank
●