Allied Construction Products, LLC www.alliedcp.com
48
TM102783_BreakerLube CML_15jul
12.0 Benefits of Allied Chisel Paste
Each time the breaker is put to work, the bushings
and tool are subjected to extreme pressure, heat and
abrasive debris. Bushings and tools are made of high
quality, heat-treated alloy steel. Yet, missed
lubrication schedules or using grease that’s
ineffective in this application will hasten wear and
weaken parts rendering them unusable. Replacing
these parts can be costly, both in terms of down time
and price.
When choosing a grease, it's important to emphasize
that the “right type" is equally important as "how
much" and "how often".
There are many types of grease available, both basic
and specialized. Basic types are generally well suited
for a variety of applications. Specialized types are
developed for specific tasks with unique properties
and formulated with special additives.
Allied Chisel Paste is a specialty grease that’s
uniquely formulated with solid lubricants, which are
highly effective in sliding and heavy side loading
applications. Solid lubricants form a layer of
protection between the bushing and tool that
effectively reduce metal-to-metal contact and thereby
reduce heat-generated damage from friction.
In comparison, grease labeled ‘General Purpose’ or
‘Multi-Purpose’ are basic lubricants. These types are
less formulated and cheaper to produce. They
normally contain few additives and most are unlikely
to contain any solid lubricants. When subjected to
heavy side loading, the liquid lubricant is squeezed
out, leaving the bushing and tool unprotected.
Additionally, the right type of grease must be able to
withstand high temperatures. The grease must have
superior clinging ability to stay put at high
temperatures, otherwise it offers little protection if it
melts and runs down the tool.
Many factors, including operator technique,
determine whether the breaker will remain
productive. Everyday wear-and-tear is unavoidable
and no other component receives more punishment
than the bushings and tool. However, with attention
to maintenance, including timely re-lubrication and
through the regular use of Allied Chisel Paste, the
wear of these parts and the cost to replace them can
be minimized.
Allied Chisel Paste Specifications
NLGI Grade - No. 2
Thickener Type – Calcium sulfonate complex
Solids include graphite and copper
Dropping Point º F (º C), min. – 500 (260)
Oil Viscosity @ 100º F (40º C) – 200-240
Application methods include brushing, grease
gun and all Allied automatic grease dispensers
IMPORTANT
Non-approved lubricants may cause loss of
performance or equipment damage. The use Allied
Chisel Paste is strongly recommended to protect
total warranty coverage. Application Restriction -
Chisel Paste is NOT suitable for use with roller
type bearings.
Table 12.1 Packaging / Ordering Information
Container
Packaging
Part No.
14.5 oz. Tubes*
Qty x 10
574430
14.5 oz. Tubes*
Qty x 30
574431
35 lb. Bucket
Qty x 1
676698
120 lb. Drum
Qty x 1
679968
*Fits standard hand operated grease guns.
IMPORTANT
Contamination interferes with reliable operation and
will shorten pump life. Prevent dirt and debris from
entering the pump system. Always clean the area
around connections prior to opening the system.
Keep lubricants properly stored in their original,
sealed container until ready for use.
Fig. 12-1 Delivery Adjustment – OK
- Lacking X -
Excessive X
