Allied Construction Products, LLC www.alliedcp.com
8
TM102783_BreakerLube CML_15jul
5.0 Product Configuration
5.1 Introduction to Available Pump Configurations
The design of the basic pump assembly
is the same but differences are seen in
the way that it can be adapted to suit
the different needs of the carrier and
breaker.
A1) Basic Pump A102472
Input Voltage - 24VDC
Reservoir - 2 Gallon
w/ Single Element
A2) Basic Pump A102473
Input Voltage - 24VDC
Reservoir - 1 Gallon
w/ Single Element
A3) Basic Pump 102474
Input Voltage - 12VDC
Reservoir - 1 Gallon
w/ Single Element
Fig. 5-1 Basic Pump Assembly BreakerLube CML Series
Table 5.1 Basic Pump Assembly - Parts Common to A1, A2, A3.
A
Basic Pump Assembly With Low Level Control and Single Pump Element (Specify 12VDC or 24VDC)
3 Re-fillable
Reservoir. (Specify Size 1 or 2 Gallon)
21
Pump Element (Qty-1 included. Order additional elements separately)
24 Adapter
25
Pressure Relief Valve (Qty-1 included. Order additional relief valves separately)
26
Gray Connector Pre-wired with 4-conductor wire Cord for (Low-Level Control)
43
Black Connector Pre-wired with 4-conductor Cord (Power Supply to Motor)
* Mounting
Hardware
Table 5.2 Several adaptations are available to suit different needs of the carrier and breaker, including:
B)
Operating Voltage
12 or 24VDC (VAC also available upon request)
C)
Reservoir Size
1 or 2 Gallon
D)
Pump Element(s)
1 Standard, or Two Element Adapter or Three Element Adapter Kit
E)
Separate Lube Passage
Requires 2
nd
element , relief valve and lube line
F)
Lube Line Kits
Available in standard lengths of 40’, 60’, 80’ and come pre-filled.
A 2
nd
pre-filled hose is also included. It will attach to the breaker.
25,a,b
21
43
26
24
3
*
A
