Specifications
74
Manta Technical Manual V8.0.1
Manta G-145B NIR
The following table provides model specifications. The values are valid for Manta
G-145B NIR. For specifications common to all models, see
Feature
Specification
Manta G-145B NIR
Sensor model
Sony ICX285AL with EXview HAD CCD™ technology
Resolution (H × V)
1388 × 1038
1.4 MP
Shutter mode
Global shutter
Sensor type
Interline CCD, Progressive Scan
Sensor format
Type 2/3
Sensor size
11.0 mm diagonal
Pixel size
6.45 μm × 6.45 μm
Maximum frame rate at full
resolution
15.0
fps (NIR mode: Off/On_Fast)
13.9 fps (NIR mode: On_HighQuality)
Maximum image bit depth
12-bit
Image buffer
32 MB
StreamHoldCapacity
Up to 22 frames at full resolution
Monochrome pixel formats
Mono8, Mono12, Mono12Packed
Exposure time control
20 µs to 60 s; 1 µs increments
28 µs to 60 s for NirMode=Off/On_Fast and ExposureMode=External
Gain control
0 to 33 dB; 1 dB increments
Binning
Horizontal: 1 to 8 columns; Vertical: 1 to 14 rows
Decimation X/Y
Horizontal and Vertical: 1, 2, 4, 8 factor
Power consumption
4.2 W at 12 VDC; 4.9 W PoE
Trigger latency
1
Idle state: 58.7 µs; Frame valid state: 58.7 µs
Trigger jitter
1
Idle state:
±
35.7 µs; Frame valid state:
±
35.7 µs
Camera dimensions
(L × W × H)
86.4 × 44 × 29
mm
Mass (typical)
PoE model: 210 g; Non-PoE model: 200 g
1
It is possible to start the exposure of the next frame while the previous frame is read out:
•
Idle state: the sensor is ready, and the camera is idle. The camera is waiting for the next trigger.
•
Frame valid state: the sensor is reading out data and camera is busy. If the next frame is requested by an
external trigger in this state, higher latency may occur as compared to the idle state.
Table 23: Manta G-145B NIR model specifications
