Compliance and intended use
26
Manta Technical Manual V8.0.1
Board level models
Board level models are designed for integration and are delivered without housing
on customer's request. Because housing design is critical to the electromagnetic
compatibility (EMC) of a camera, no certification tests regarding electromagnetic
interference (EMI) have been performed for these models. Users who design
board level into their systems should perform appropriate testing regarding EMC
after the product design is completed. Compliance with requirements not
EMC-related remains unaffected.
Avoid electromagnetic interferences
For all power and port connections, only use shielded cables or cables
recommended by Allied Vision.
Camera applications and intended use
General use
•
The user is responsible for operating the camera within the specifications that
are defined in this document, and within appropriate environmental conditions
and technical prerequisites, to ensure trouble-free camera operation.
•
The camera is compliant with current data communication standards; however,
those standards do not allow for self-monitoring. Thus, the camera cannot be
used as a standalone device for security-related monitoring operations.
•
The camera is a hardware product. Only when used with appropriate
accompanying software, the camera will produce the desired results. The
realization of intelligent solutions requires additional software that is suitable
to run with the camera.
•
The camera is a component, it is neither a complete product, nor is it a
ready-made technical solution.
•
The camera-supporting software can be obtained and installed separately from
the camera. Usage of the software is solely the responsibility of the user.
•
The camera must not be opened. For all repair tasks, contact Allied Vision or
one of Allied Vision's authorized representatives.
•
Observe the intended use. The camera must only be used for purposes that are
in conformity with the stated intended use.
•
Additionally, refer to the warranty information on the Allied Vision website.
•
For usage in product with specific safety requirements a Quality Assurance
Agreement with Allied Vision is required.
