Specifications
43
Manta Technical Manual V8.0.1
CMOSIS/ams CMOS sensors
The curves in the absolute QE plots shown in this chapter are taken from the
sensor manufacturer data sheet.
The information was correct at the time of publishing. Sensor specifications may
change without notice.
Wavelength
The wavelength range in the absolute QE plots is based on the information
available in the sensor manufacturer data sheet at the time of publishing. Many
color sensors are documented by the sensor manufacturer only for wavelengths
from 400 nm to 700 nm.
Spectral response plots
Sony provides relative response curves in their sensor data sheets. To create the
spectral response plots shown in this chapter, the relative response was adjusted
as per three measured QE values (at 448 nm, 529 nm, 632 nm) for color sensors
and one measured QE value (at 529 nm) for monochrome sensors.
Specifications common to all models
The following table provides specifications common to all Manta models.
Feature
Specification
Default lens mount
C-Mount
Optional lens mount
•
CS-Mount
•
M12-Mount (S-Mount) adapter
Default optical filter
•
Monochrome models: B 270 ASG protection glass
•
Color models: Hoya C-5000 IR cut filter
•
NIR models: No filter
1
Optional optical filters
•
Protection glass B 270 (ASG)
•
IRC type Jenofilt 217 (IR cut filter)
•
IRC Hoya C-5000 (IR cut filter)
•
IRP RG715 (IR pass filter)
•
IRP RG830 (IR pass filter)
Default housing
Straight view
Table 7: Specifications common to all Manta models (sheet 1 of 2)
