Allied Vision BONITO, Technical Manual

Page: 9 / 83

Bonito Technical Manual V2.4.0
9
Introduction
Manual overview
This manual overview outlines the contents of each chapter of this manual.
• chapter Contacting Allied Vision Technologies on page 6 lists Allied Vision
contact data (phone number and URL) for both:
– Technical information / ordering
– Commercial information
continued from previous page
V2.2.1
(continued)
11 May 2012
(continued)
• Added example drawing: see Figure 10: Example conversion
circuit from +/- 6 V RS232 output to 5 V TTL input on page 27
• Added information to use exact multiples oft the current line
duration : see chapter Timer prescaler value (K) on page 46
• C/-2 t
L
to t
L
in Table 13: Exposure control modes:
Exposure timing mode (bit group: e) on page 42
• Added rising edge description (bit group e, value=2): see
Image on demand mode (IOD) with exposure timer on page
43
• Added more precise description of PIV mode: see PIV mode =
On on page 45
• Added new chapter Product variant code (b) on page 67
• Added new chapter Command reference on page 72
V2.3.0 2013-Sep-30 • Updated RoHS (2002/95/EC) to RoHS (2011/65/EU)
• Added „Surge“ warning as requested for the EMC lab test
• Corrections derived from terminology alignment
• Change of font, necessary due to changes in typeface
• Redesigned the complete PIV mode description, added flow
diagram and table
• Redesigned the biggest part of the Exposure Mode Control
description, incl. new tables and flow diagrams
• Redesigned the Baud Rate description
• Introduced overview of value ranges, default values and
examples for each parameter described in the chapter
Cam-
era interfaces on page 22
• Replaced the drawings with new drawings that show all four
sides of the camera in chapter
Camera dimensions on page
17
V2.4.0 2014-Nov-03 • Added new Allied Vision brand name and brand logo
• Linguistic improvements
Version Date Remarks
Table 1: Document history