Introduction
Pearleye Technical Manual
V2.2.0
9
•
on page 13 gives you information about conformity of
AVT cameras (CE, FCC, RoHS).
•
on page 14 lists camera details and measured spec-
tral transmission diagrams for each camera type.
•
on page 20 provides CAD drawings of stan-
dard housing models (2D drawings), tripod adapter and cross sections of
the mounts.
•
on page 22 describes the first steps to get the camera
into operation: camera control signals and camera controls as well as
adjusting the image process.
•
on page 25 describes the control junction (I/O
pin assignment), inputs / outputs and trigger features.
•
on page 35 describes the function of the
Pearleye P-007 LWIR / Pearleye P-030 LWIR
firmware. It is related to the
individual modules of image processing and shows in what way the user
can control these modules via the serial interface.
•
on page 40 describes the basic
configuration options and general commands available for the user, being
important for the operation of an ex factory preconfigured camera. Most
probably the information stated here will be sufficient for most of the
users.
•
Advanced parameters and commands
on page 47 describes the
advanced configuration of the
Pearleye P-007 LWIR
/
Pearleye P-030
LWIR
models. For the control of an ex-factory set up camera the
intervention within the parameters stated here or rather the use of the
mentioned commands is only necessary in exceptional cases.
•
on page 66 describes the
general command reference of the
Pearleye P-007 LWIR
/
Pearleye P-030 LWIR
firmware.
•
on page 84 gives you quick access to all relevant data in
this manual.
