Appendix
Pearleye Technical Manual
V2.2.0
81
CameraSpecialFeatures
Feature
Description
AutoCalibrateOnce
Start the automatic calibration once.
(k=0 command)
The processing of this command can take several seconds,
depending on the current image rate and the number of
correction data sets available.
AutoCalibrationMode
Configure mode of the automatic calibration function.
( j=<value> command)
AutoCalibrationInterval
Setup the automatic calibration interval. 0 = Calibrate one-time,
1..65535 = Calibrate every k*256 frames.
(k=<value> command)
CorrectionDataSet
Number of the correction data set to activate.
(S=<value> command)
ReloadCameraSpecialFeatures
Force a reload of all parameters from the CameraSpecialFeatures
section.
Table 38: Camera special feature: Calibration and correction data
Feature
Description
CameraTemperatureState
Camera temperature state.
0 = The camera temperature is OK.
1 = The camera temperature is outside the optimum range.
CameraTemperatureStateReg
Camera temperature state register.
QueryCameraTemperatureState
Query camera temperature state.
(T=1 command)
Table 39: Camera special feature: Camera temperature
Feature
Description
ShutterTemperatureValue
Shutter temperature value in degree Celsius.
ShutterTemperatureValueReg
Shutter temperature value register.
QueryShutterTemperatureValue
Query camera shutter temperature state.
(T=2 command)
MechanicalShutter
Set the mechanical shutter state manually.
(I=<value> command)
Table 40: Camera special feature: Shutter
