Allied Telesis AT-TQ Series, User Manual, Page: 86 / 174

Chapter 3: Manage Menu
86
Generating Event Messages for Unknown Access Points
The access point can alert you with event messages if it detects unknown
access points. It stores the messages in the event log and can also send
them to a syslog server on your network. Figure 26 is an example of the
message.
Figure 26. Event Message for Unknown Access Points
At pre-defined time intervals, the access point compares the MAC
addresses of neighboring access points against a list of approved
addresses that you create, and generates event messages for access
points whose MAC addresses are not in the approved list.
Here are the feature guidelines:
 If you want the event messages sent to a syslog server, you must
have a syslog server on your network and you need to configure
the syslog client on the access point, as explained in “Configuring
the Syslog Client” on page 124.
 You need to know the MAC addresses of known neighboring
access points. You use the addresses to create a list of approved
devices when you configure the feature. The access point does not
send event messages for devices in the list. To view the MAC
addresses of neighboring access points, refer to “Viewing
Neighboring Access Points” on page 126.
Enabling Event
Messages for
Unknown Access
Points
To configure the access point to generate event messages when it detects
unknown access points, perform the following procedure:
1. Select Pre-Configured Rogue AP from the Manage menu.
The access point displays the “Configure Pre-Configured Rogue AP”
window shown in Figure 27 on page 87.
Apr 22 09:10:45 syslog: Rogue AP found: The MAC address of the Rogue AP is
c0:8a:de:68:32