Allied Telesis AT-TQ Series, User Manual, Page: 50 / 174

Chapter 3: Manage Menu
50
Mode (Continued) - IEEE 802.11a/n/ac: The access point
accepts 802.11a, 802.11n, and 802.11ac
clients operating at 5 GHz. This is the
default setting for the 5 GHz radio in the
AT-TQ4600 access point.
- 5 GHz IEEE 802.11n/ac: The access
point accepts 802.11n and 802.11ac
clients operating at 5 GHz.
Channel Specifies the radio channel. The available
channels vary by radio, mode, and
country. Here are the guidelines:
- The Auto setting, the default setting, sets
the channel automatically. The access
point selects the channel with the least
traffic. This is the default setting.
- You can set the channel manually using
the Channel pull-down menu.
- The Auto selection is not available when
the cluster feature is automatically
assigning the channels to the radios in the
access points. For information, refer to
Chapter 4, “Cluster Menu” on page 93.
- If you select Auto, you may use the
Eligible Channels parameter to restrict the
channels from which the access point
may choose.
- You must set the channel manually when
using the Wireless Distribution System
(WDS) bridge feature. For information,
refer to “Managing Wireless Distribution
System Bridges” on page 72.
Table 3. Modify Radio Settings Window (Continued)
Parameter Description