Allied Telesis AT-TQ Series, User Manual, Page: 84 / 174

Chapter 3: Manage Menu
84
Figure 25. Configure MAC Filtering of Client Stations Window
2. For the Filter parameter, select one of the following:
 Allow only stations in list: Select this option if you want the access
point to accept association requests from the wireless clients
whose MAC addresses you enter in the filter, and to reject
association requests from all other clients.

Block all stations in list: Select this option if you want the access
point to reject association requests from the wireless clients whose
MAC addresses you enter in the filter, and to accept association
requests from all other clients.
3. To enter the MAC addresses of the clients, use the fields next to the
Add button. After entering an address, click the Add button. You may
enter only one address at a time. You may not enter broadcast or
multicast addresses.
4. If you want to remove an address, click the address in the list and then
the Remove button. You may remove only one address at a time.
5. After adding the MAC addresses, click the Update button to activate
and save your changes on the access point.
6. From the Manage menu, select VAP.