Allied Telesis AT-TQ Series, User Manual, Page: 39 / 174

AT-TQ Wireless Access Point Series User’s Guide
39
Setting VLAN IDs
The “Modify Ethernet (Wired) settings” window has two settings for VLAN
IDs (VIDs). One setting is used to specify the management VLAN and the
other is used to designate a VLAN for untagged traffic.
Management
VLAN ID
The Management VLAN ID field in the “Modify Ethernet (Wired) settings”
window is used to specify the VLAN of your management workstations. To
specify the management VID, perform the following procedure:
1. From the Manage menu, select Ethernet Settings.
The access point displays the “Modify Ethernet (Wired) settings”
window in Figure 7 on page 36.
2. Select the Management VLAN ID field and enter a value of 1 to 4094.
The number should be the VID of the VLAN where your management
workstation is located. You may specify only one VID.
3. Click the Update button to activate and save your changes on the
access point.
VLAN ID for
Untagged Traffic
The Untagged VLAN and Untagged VLAN ID fields in the “Modify Ethernet
(Wired) settings” window allow you to specify a VLAN for untagged traffic.
To specify the VLAN, perform the following procedure:
1. From the Manage menu, select Ethernet Settings.
The access point displays the “Modify Ethernet (Wired) settings”
window in Figure 7 on page 36.
2. For the Untagged VLAN field, do one of the following:

Click Enabled if you want to be able to designate one VLAN on the
access point as an untagged VLAN. This is the default setting.
 Click Disabled if the access point is to handle only tagged packets.
3. If your selected Enabled, select the Untagged VLAN ID field and enter
the ID number of the VLAN which is to carry untagged packets. You
may enter only one VID. The default value is 1.
4. Click the Update button to activate and save your changes on the
access point.