Allied Telesis AT-TQ Series, User Manual, Page: 79 / 174

AT-TQ Wireless Access Point Series User’s Guide
79
The window has four sections. You may use the sections to create
WDS bridges to different access points.
2. Use the Radio pull-down menu in one of the sections to select the
radio for the WDS bridge between the access points. Radios 1 and 2
are the 2.4 and 5 GHz radios, respectively, The default is radio 1.
Note
You cannot configure the fields of a WDS bridge if the corresponding
radio is disabled. If the fields are deactivated, refer to “Configuring
Basic Radio Settings” on page 43 or “Configuring the Radio
Settings” on page 47 for instructions on how to enable the radio.
The Local Address field displays the MAC address of the radio. You
cannot change this field.
3. Click the dialog circle with the arrow to the right of the Remote Address
field.
The device displays the neighboring access points in a window. An
example is shown in Figure 22.
Figure 22. Remote Address List
4. Click the MAC address of the remote access point of the WDS bridge.
You may select only one neighboring access point.