manualshive.com logo in svg

Allied Telesis AT-TQ Series, User Manual, Page: 132 / 174

Share
Download
Allied Telesis AT-TQ Series User Manual Download Page 132

Chapter 5: Status Menu

132

Figure 41. Transmit Statistics Table of the View Transmit and Receive 

Statistics for this Access Point Window

The columns are described in Table 21.

Table 21. Transmit Statistics Table

Column

Description

Interface

Displays the access point interfaces.

Total packets

Displays the total number of packets the 
interfaces have transmitted.

Total bytes

Displays the total number of bytes the 
interfaces have transmitted. The values 
do not include the amount of padding for 
packets below the minimum size, and for 
FCS.

Total drop packets

Displays the total number of packets the 
access point dropped before 
transmission.

Total drop bytes

Displays the total number of bytes the 
access point dropped before 
transmission.

Errors

Displays the total number of packets with 
errors, such as CRC errors.

Summary of Contents for AT-TQ Series















































































































































































Reviews:

No comments