• H XX : The residual humidity value is below 30% (the linen
gets dry)
Above 30% residual humdity, the linen is so wet that there is no
accurate measurement. For this reason there is not shown a value
on the display, just two dashes. It can take 10 to 40 minutes, de-
pending the amount of load and how wet the linen is, before the
Residual Humidity Value is shown on the display.
The default programmed value for residual humidity of linen is
5%.
IMPORTANT: While the dryer is running, do not open
and close the door, it disturbs the humidity control
measurement.
WARNING
CERTAIN FABRICS CAN GET DAMAGED WHEN
DRYED UNTIL A RESIDUAL HUMIDITY OF 0%.
(BONE DRY). CERTAIN FABRICS GET ELECTRO-
STATIC CHARGED FOR A RESIDUAL HUMIDITY BE-
LOW 5% (WHICH SHOULD BE AVOIDED).
C132
WARNING
THE HUMIDITY CONTROL SYSTEM IS NOT MADE TO
RUN WITHOUT LOAD OR WITH A VERY SMALL
LOAD. THE SYSTEM CAN ONLY FUNCTION IN A
NORMAL WAY WHEN THERE IS SUFFICIANT EVAP-
ORATION TO BE MEASURED BY THE AIR HUMIDITY
SENSOR.
C133
Operation menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
31
Part No. D1621ENR3
Summary of Contents for SGHP190E
Page 2: ......
