Alliance Laundry Systems SGHP190E, Programming Manual

Page: 16 / 57

I:Set Unwrinkle Time :
_ _ _ Min
• The Unwrinkle function
avoids that the linen is
wrinkled at the end of the
dry cycle when the opera-
tor has no time to Unload
the machine immediately.
• The unwrinkle time is the
time that the machine will
reverse the fabrics for a
long intermedium time in-
terval.
• The function is switched
OFF for a time setting = 0
minutes.
• Programmable in steps of 5
minutes.
• Limites : 0 – 180 minutes.
• 0 Minutes is the default
value.
• Adjust the value with the
ARROW UP or ARROW
DOWN button and Press
the ENTER button to con-
firm.
• The buzzer will function
each time the mechanical
action is restarted to warn
the operator that the drying
cycle has terminated.
I:Unwrinkle On Time :
_ _ Sec
I:Unwrinkle Off Time :
_ _ Min
• Set the Unwrinkle On and
Off Time.
• Limits :
• On Time : 3-99 seconds
• Off Time : 1-15 mi-
nutes
• Default value : - On Time :
• 5 seconds
• Off Time : 5 minutes
• Adjust the programmed
time with the ARROW UP
and DOWN buttons.
• Press the ENTER button to
confirm.
I:Service Intervall :
3000
• Insert the number of cycles
at which a maintenance is
required. See Installation
and maintenance manual.
• the default setting is :
• 3000
• Press the ENTER button to
confirm.
I:Buzzer Time : 5 Sec
• Insert the buzzer time. At
the End of the Dryer cycle,
when the message Unload
is displayed, the buzzer
will function for the pro-
grammed time.
• 5 Seconds is the default
value.
• Press the ENTER button to
confirm.
• The buzzer will function
each time when operator’s
attention is needed.
• The programmable Buzzer
time interval is not applica-
ble in the case of error
messages.
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
16 Part No. D1621ENR3