Alliance Laundry Systems SGHP190E, Programming Manual

Page: 15 / 57

Initializing the Machine
Initializing Steps
Initializing the machine goes in four steps:
1. Install the machine mechanically. (See Installation Manual)
FLEX CONTROL :
2. Select the machine specific settings in the Configuration
Menu.
3. Select the operator specific settings in the Initialization Menu.
4. Adjust standard Programs or create new Programs at the Pro-
gram Menu.
WARNING
The initialization should be performed by qualified
personnel only. An incorrect initialization may cause
serious injuries and serious damage to the machine!
C026
WARNING
BEFORE MAKING CHANGES IN THE CONFIGURA-
TION AND INITIALIZATION MENU READ THIS MAN-
UAL CAREFULLY.
CHANGES YOU HAVE MADE WILL INFLUENCE THE
DRYER PROGRAM PROCESSES. WE RECOMMEND
BEFORE MAKING CHANGES TO CAREFULLY WRITE
DOWN WHAT THE PREVIOUS SETTINGS WERE.
AS THE CONTROL DRYER COMPUTER IS USED FOR
A WHOLE RANGE OF DRYERS, AFTER THE INSTAL-
LATION OF A NEW CONTROL DRYER COMPUTER,
YOU NEED TO PROGRAM MACHINE SPECIFIC SET-
TINGS INTO THE CONFIGURATION MENU. Refer to
"Configuration menu".
AT THE INSTALLATION OF NEW SOFTWARE, AFTER
LOADING THE FACTORY SETTINGS (Refer to "Con-
figuration menu") YOU NEED TO CHECK THE DE-
FAULT SETTINGS ONE BY ONE TO FIND OUT IF
THEY CORRESPOND WITH THE SETUP AS YOU
PREFER.
THE CONFIGURATION AND INITIALIZATION OF THE
DRYER HAS BEEN DONE AT THE FACTORY. FOR
THE CREATION OF NEW PROGRAMS, NO CHANGES
HAVE TO BE MADE IN THE INITIALIZATION OR CON-
FIGURATION MENUS.
C110
Initialization Menu
HOW TO GET INTO THE INITIALIZATION MENU
The initialization menu can only be accessed when the machine is
in standby (the power is switched on, but no program is started).
• SELECT PROCESS_ _ is displayed.
• Switch the programming switch Program Mode.
• The Main menu is now available.
• The Initialization Menu is the first Menu and is displayed im-
mediately.
Main Menu Initialization
• Press the ENTER button to make your selection.
• Now you will see the first menu item.
• By pressing the ARROW RIGHT or LEFT button you can see
the menu items one by one.
I:Language: English
• Select the preferred Lan-
guage from the list by
pressing the ARROW UP
or DOWN button.
• English is the default set-
ting.
• Press the ENTER button to
confirm.
• English
• Dutch
• Czech
I:View Programs: Ena-
ble Menu ?
I:Enable Program X ?
Yes/No
• The 20 programs can be
enabled or disabled in the
View Programs Enable
Menu.
• If you don‘t want to select
the programs, press the
ARROW RIGHT button.
• If you want to select the
programs, press the EN-
TER button.
• Press the YES or NO but-
ton to Enable / Disable pro-
grams.
• Yes is the default value.
• Yes : the Program is ena-
bled. No : the Program is
disabled.
• Press the ENTER button to
confirm.
Initializing the Machine
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
15 Part No. D1621ENR3