N°
Failure Message
Failure
Action
Fault Occurrence
E40 (1)
PhaseErr
Faulty sequence (order) of
phases or interruption /
drop of phase voltage in the
power supply system
H motor-drive Off,
Full Stop at safe tempera-
ture
Whole cycle
E41
Service Due
Service Due Warning
For Info only Open door =
reset
End cycle
E150-E165
Memory Err
Memory Error
Full stop + safety time
Any time
E170-E199
Softw Err
Software Error
Full stop + safety time
Any time
(1) machine with heat pump (HP)
Service Menu
In the Service menu you have some extra utilities:
• The Software Version Number
• An overview of the 8 last failure messages
• Statistics for general occurence of error messages
• An overview of the input states
• Reset Cycle Counter and Statistics Error Messages
HOW TO GET INTO THE SERVICE MENU
The SERVICE menu can only be accessed when the machine is
in standby (the power is switched on, but no program is started).
• SELECT Process_ _ is displayed.
• Switch the programming switch to Program Mode.
• The Main menu is now available.
• Press the ARROW RIGHT button to select the SERVICE
menu.
Main Menu Service
• Press the ENTER button to make your selection.
• Now you will see the first menu item.
• By pressing the ARROW LEFT or RIGHT button you can see
the menu items one by one.
S:Software Version
1.00
• The Software Version num-
ber.
• You can select the next
menu item by pressing the
ARROW RIGHT button.
S:View Fault Messag-
es?
• If you don‘t want to see the
Fault messages, press the
ARROW RIGHT button.
• If you want to see the Fault
messages, press the EN-
TER button.
S:Fault N° 1 :
EXXX:YYYYYYYY
YY
• There are 8 Fault Messages
kept in EEPROM memory.
• Fault N° 1 : the last oc-
curred error message.
• Fault N° 2 : the last –1
occurred error message.
• …
• Fault N° 8 : the last – 7
occurred error message.
• E XXX : The Error mes-
sage number.
• YYYYYYYYYY : The Er-
ror message name.
• Press the ARROW RIGHT
button to see message by
message and to leave the
Error message menu.
• If no messages are dis-
played, this means that no
Errors have occurred.
S:Erase Fault Messag-
es? No
• If you don‘t want to erase
the Fault messages, press
the ARROW RIGHT but-
ton.
• Press the YES and ENTER
button if you want to erase
the Error messages.
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
39
Part No. D1621ENR3
Summary of Contents for SGHP190E
Page 2: ......
