Alliance Laundry Systems HTEB17-N2802, Service Manual

Page: 60 / 180

58
801774
Section 3 Troubleshooting (NetMaster Models – Dryer Control)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
38. NO HEAT (ELECTRIC DRYER MODELS)
Is there voltage across
the leads to the heating
element?
Is there
voltage from the
output side of the
limit thermostat
to L2?
Is there
voltage to the
input side of the limit
thermostat to L2?
Is there
voltage to the
output side of the
thermo fuse on the
element?
Is there voltage to the
input side of the
thermal fuse?
Is there voltage on
F S -1 on the control to
L2?
Is there voltage on
F S -2 on the control
board to L2?
Check for
proper operation
of centrifugal switch on
motor. Does it operate
properly?
Replace heating
element.
Check and
replace wiring
between
components.
Replace element.
Check for proper
air flow and
operation of
limit thermostat.
Replace thermo
fuse.
Correct wiring
between control
and thermo fuse
on the
element.
Replace motor.
Correct wiring
between motor
and element &
motor and L2.
Make sure unit is
calling for heat.
Check operation
of thermistor.
Replace the
control.
(1)
(2)
( 3 )
(4)
(5)
(6)
(7)
(8)
YE S
NO
YE S
NO
YE S
NO
YE S
YE S
NO
NO
YE S
NO
YE S
NO
YE S
NO
Dwg. 6
DRY 3 59S
1
7
8
2
3
4
5
6