32
512176
Section 5 Service Procedures
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
32. LINT FILTER
a. Open loading door and remove screw from end
of lint filter. Refer to
b. Lift lint filter out of air duct, paying close
attention to orientation.
IMPORTANT: When installing lint filter, be sure to
install the filter with the words facing the front of
the dryer. If filter is installed backwards, lint will
accumulate in exhaust system, which can adversely
affect dryer performance.
33. LOADING DOOR
a. Open loading door.
b. Remove screws holding loading door to hinges.
.
Figure 12
D306S
Lint Filter
Attaching
Screw
Hinge
Attaching
Screws
Loading Door
Attaching
Screws
Lint
Filter
Front
Bulkhead
Summary of Contents for AES17AWF
Page 2: ......
