Rockwell Automation Publication 2080-UM002K-EN-E - March 2019
291
User Interrupts
Appendix
D
2.
In the User Interrupt Configuration window, configure this POU as a User
Fault routine.
User Interrupt Instructions
STIS - Selectable Timed Start
STI0 is used in this document to define how STIS works.
Instruction
Used To:
Page
STIS – Selectable
Timed Start
Use the STIS (Selectable Timed Interrupt Start) instruction to
the start the STI timer from the control program, rather than
starting automatically.
UID – User Interrupt
Disable
Use the User Interrupt Disable (UID) and the User Interrupt
Enable (UIE) instructions to create zones in which user
interrupts cannot occur.
UIE – User Interrupt
Enable
UIF – User Interrupt
Flush
Use the UIF instruction to remove selected pending interrupts
from the system.
UIC – User Interrupt
Clear
Use this function to clear Interrupt Lost bit for the selected
User Interrupt(s).
STIS
STIS
STIS(name or Pin ID)
or ENO(Pin ID)
Enable
IRQType
SetPoint
45638
Summary of Contents for Micro830
