Publication 1756-UM050A-EN-P - December 2001
Using Analog I/O with Direct Connection
6-5
The
Module Properties
window will open.
3.
Enter the following parameters:
You must now configure the channel settings of the Analog I/O
module. You do this using a series of pages that appear in the Module
Properties window.
4.
Click on the
Next
button. The following page will open:
5.
This window allows you to adjust the
Requested Packet Interval
(RPI)
to meet your system’s requirements (for this example you
can leave it at the default 12 ms rate).
Name
Remote_Analog_Output
Slot
3
Comm Format
Float Data
(1)
(1)
All analog Comm Formats use direct connection. The default is
floating decimal point data.
Electronic Keying
Compatible Module
Summary of Contents for ControlLogix 1756-ENBT
