Allen-Bradley 1404-M4, User Manual

Page: 213 / 356

Publication 1404-UM001D-EN-E - October 2004
Powermonitor 3000 Data Tables A-39
Table A.29 List of Event Types
Applies to: Table A.27 Event Log Results
PM3000 Type See table
Event
Code. M4
M5 M
6 M
8 Event type Event Command
Code Comment
0
• • •
No event 0 The log starts with no events recorded
1
• • •
Setpoint triggered Setpoint Number A setpoint activated
2
• • •
Setpoint released A previously active setpoint released
3
• • •
Relay force energized Relay Number 1 = Form C relay, 2 = KYZ
4
• • •
Relay force de-energized
5
• • •
Relay force released
6
• • •
Status input set Status Input Number
7
• • •
Status input cleared
8
• • •
KWh counter set or cleared 1 Records command action
8
• • •
KVARh counter set or cleared 2
8
• • •
KVAh counter set or cleared 3
8
• • •
Ah counter set or cleared 4
8
• • •
All energy counters cleared 5
8
• • •
Trend log cleared 6
8
• • •
Min/max log cleared 7
8
• • •
Factory defaults restored 8
8
• • •
Status input #1 counter cleared 9
8
• • •
Status input #2 counter cleared 10
8
• • •
Reserved 11
8
• • •
Single setpoint timer cleared 12
8
• • •
All setpoint timers cleared 13
9
• • •
Power-up 0 Control power was applied.
10
• • •
Power-down 0 Control power was lost or internal reset occurred.
11
• • •
Selftest failure Status Error Code Refer to Table A.28 Status Error Codes (bitfield)
12
• • •
Date/time set 0 The date and/or time was set or altered.
13
• • •
Change of non-setpoint config data 0
14
• • •
Change of setpoint config data 0
15
• • •
NVRAM Clr 0 NVRAM has been cleared due to an extended loss
of control power or internal error.
16
•
Transient detected
17
•
User Comment User has manually entered a comment to record the
impact of an event on your plant or process.
18
• • •
External Demand Sync Timeout The demand delay expired before the next expected
external demand sync
19
• • •
Comm Card Reset An unexpected comm card condition has been
detected and the master module has reset the
comm card in an attempt to resume normal
operation.
Allen-Bradley HMIs