6
Install inside escutcheon.
6a Connect the cable from the outside escutcheon to the
connector on the inside escutcheon.
6b Route wire from door position sensor (DPS) through
hole in inside escutcheon.
6c Place inside escutcheon on backplate (1), and slide
down to hook onto backplate (2). Secure with screws
(3). Make sure escutcheon and spring cage are properly
aligned before tightening screws.
Actual Size
1
2
3
6d Connect DPS wire (1), route wire behind tabs (2), and
tuck excess wire back into the hole in door (3).
1
2
2
2
3
