April 1999
Page 3 of 17
Fleet Shower Room Assembly Instructions
GENERAL NOTES
¾
The
Fleet Shower Model
is supplied either assembled or unassembled.
Please retain these assembly instructions for future use in the event
replacement parts are required.
¾
All references to left, right, front and rear throughout the entire assembly
instructions are shown in figure 2 exploded parts drawing and as viewed
when looking at the front of the shower room from the outside.
¾
The
Fleet Shower Model
assembly will require two persons.
¾
Please follow the instructions in the sequence they are presented. It is
suggested that you read through the entire assembly instructions prior to
proceeding.
¾
We strongly suggest that these shower rooms, as with all portable
structures, be transported and handled with care. Dropping the shower
room when loading and unloading off of transport vehicles could cause
damage to the structure.
¾
The door lock described in STEP 15, page 15 of 17, is an option. For
restrooms supplied without the lock disregard this section.
TOOLS REQUIRED
Rivet Gun
Vise-Grips
8" C-Clamp
Drill
3/64" Drill Bit
3/8" Drill Bit
Straight Blade
Screwdriver
Phillips Cross-
head Screwdriver
Spanner Driver
Bit
7/16" Socket
Wrench
1/2" Socket
Wrench
Pliers
Adjustable wrench
1 1/8" Hole saw
2 Tapered Awls
Staple gun
Staples
Rubber Mallet
Caulking gun
Caulk
Teflon pipe tape
Masking Tape
Step Ladder
Saw Horse
PLEASE READ THESE INSTRUCTIONS
