April 1999
Page 11 of 17
Fleet Shower Model Assembly Instructions
STEP 9.
WALL PANELS TO BASE SUB-
ASSEMBLY:
See figure 9. Using PC-000192, SEMS 1/4 x 1 1/4
self- threading, lag screws with washers
assemble the walls to the base in the sequence
shown in figure 9.
CAUTION: Do not over-tighten
the lag screws.
STEP 10. TOP REAR EXTRUSION
INSTALLATION:
Put the top rear extrusion, with the mitre edges
facing down (so that they match the other two
extrusions) on the top edge of the rear wall
panel and press into place.
STEP 11. LARGE FLY SCREEN AND ROOF,
INSTALLATION:
Examine the large fly screens. On the lower
edges are curved tabs that fit the rolled lip of the
side wall panels. From the inside of the
restroom, position the tabs of the fly screen on
the curved lip of a side wall panel by tilting it out
and then guiding it back and around the lip as
shown in figure 10. There will be three long tabs
of the fly screen on the inside, top surface of the
side wall panel.
HINT: hold the screens in place with two small strips of
masking tape.
Install the other fly screen.
Position the roof over the unit pushing it all the
way down into the slots of the rear top extrusion
and doorjamb. Make sure the mitre cuts are
square to each other. Have another person hold
the roof firmly down over the top rear extrusion.
Line up the holes in the top rear extrusion and
rear wall panel inside the restroom. Use these
holes and drill only through the roof using a
13/64" drill bit.
CAUTION: Do not drill all the way
through the top rear extrusion.
Rivet in place
using PC-000114 star rivets. Pull the edge of the
roof down into the slot in the doorjamb making
sure the roof is positioned evenly around the
jamb. Have another person hold the roof firmly
down over the doorjamb. From the inside, using
the predrilled holes in the doorjamb as a guide and a 13/64" drill bit, drill
through the three holes and only through the roof wall.
CAUTION: Do not
drill all the way through the aluminium doorjamb.
Rivet in place using PC-
000104 rivets.
Figure 9
Figure 10
