Setup of the filler component consists of the following major procedures:
•
Picking a Run Program number.
•
Setting up Target Weight and Feedback Operation
•
Setting up Auger and Agitator
•
Controlling a Cutoff and Delay After Fill
•
Specifying Level Control and Product Infeed Operation
Procedures to perform these setup operations are provided in the following. The Appendix
of this manual contains a Setup Run Program Worksheet that can be used to help you
develop and record Setup selections and entries.
Picking a Run Program Number
The Touch Screen controls provide the ability to store up to 50 different setup run programs
for use with different containers, products, fill amounts, etc. Use the following to set up and
store setup programs.
Model B-SV-600 Touch Screen Control Panel Users Manual
9
AFI Publication 1240410
•
Issue: 1
•
April 2010
Setting Up Filling
•
Press
MENU SCREENS
and
SYSTEM MENUS
. Press
EXIT
.
•
From the
SYSTEM MENU
screen, Press
SELECT RUN PROGRAM NUM-
BER
to choose a number. Press the corresponding number from 1-5 or use the
è
to choose from 6-50.
