Alienware 15 R2, Quick Start Manual

Page: 91 / 173

UPMIDIAS
Replacing the I/O board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the I/O board with the screw holes on the
computer base.
2 Replace the screws that secure the I/O board to the computer base.
3
Slide the I/O-board cable into the I/O board and press down on the latch to
secure the cable.
Post-requisites
1 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
2 Replace the solid-state drives .
3
Replace the memory module .
4 Replace the base panel .
66