UPMIDIAS
Replacing the hard drive
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
After working inside your computer
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when
handling the hard drive.
Procedure
1
Connect the interposer to the hard drive.
2
Align the screw holes on the hard-drive bracket with the screw holes on
the hard-drive assembly.
3
Replace the screws that secure the hard-drive bracket to the hard-drive
assembly.
4
Slide the hard-drive assembly under the tab on the computer base and
align the screw holes on the hard-drive assembly with the screw holes on
the computer base.
5
Replace the screws that secure the hard-drive assembly to the computer
base.
6
Route the hard-drive cable through the routing guides on the computer
base.
7
Connect the hard-drive cable to the system board.
8
Route the keyboard-backlight cable, keyboard cable, and macro-keys cable
through the routing guides on the computer base.
Post-requisites
Replace the
.
31
Summary of Contents for 15 R2
Page 55: ...UPMIDIAS 8 Disconnect the interposer from the hard drive 1 interposer 2 hard drive 30...
Page 72: ...UPMIDIAS 5 Lift the touch pad off the palm rest assembly 1 palm rest assembly 2 touch pad 47...
Page 159: ...UPMIDIAS 4 Lift the battery off the computer base 1 screws 2 2 battery 3 computer base 134...
Page 162: ...UPMIDIAS 1 computer base 137...
