69
4.
Input the FTP server address.
5.
Select Upgrade to begin update process.
6.
After the system firmware has been update, reboot the DVR.
Note:
If the DVR fails to update, please contact your system supplier for further
assistance.
12.7 Restoring Default Settings
To restore default factory settings to your DVR:
1.
Enter the Default Settings menu, shown below by clicking Menu > Maintenance >
Default.
Select OK to restore factory defaults.
Note:
Network information such as IP address, subnet mask and gateway will not be
restored.
If alarm sounds following restore then
a
dditional changes are required.
See section 16.2.
12.8 Viewing System Information
To view system information:
1.
Enter into the Information menu, shown below by clicking Menu > Maintenance >
Information.
2.
Select OK to exit to the previous screen.
Intelligent Security and Fire Ltd
