38
7. Alarm
Settings
7.1 Configuring
Alarms
7.1.1 Setting up Motion Detection
Set up properly, using a motion detection recording will increase the number of days your
DVR is able to record. It will only record relevant events rather than recording
everything, making searching for an event easier.
To set up motion detection:
1. Enter Camera Setting:
Enter the Camera Settings interface by navigating to Menu > Setting > Camera. Select
channel to configure motion detection on.
2.
Select the
Advanced
tab to open up the Advanced Camera Settings menu, shown
below.
3.
Tick the checkbox to the left of Motion Detection.
4.
Click the Area Settings button to enter the Motion Detection area and Sensitivity
configuration interface.
5.
The Motion Detection area, shown below, allows you to mask out areas where you
would like motion to be detected in. The maximum area is the whole screen. Mask the
Motion Detection area.
Intelligent Security and Fire Ltd
