ALIBI ALI-DVR1004E 960H User Manual Download

Page: 91 / 116

ALI-DVR1004E Series 960H DVR User Manual

2. In the file list of the USB device, highlight the DVR configuration file you want to load, and then click

Import

3. Allow the DVR to fully reboot, then use it normally.

8.4 Upgrade Firmware

You can upgrade the firmware through a local device or remote FTP server. You should check the current Firmware version
before upgrading your DVR firmware. Firmware upgrade should only be performed when recommended by your DVR support
organization.

1. To check the current firmware version, open the System information display. Go to

Menu | Maintenance | System

Information

2. If the firmware needs to be upgraded, click the

Upgrade

tab on the left.

SECTION 8: SYSTEM MAINTENANCE

Summary of Contents for ALI-DVR1004E 960H





















































































































Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands

ALIBI ALI-DVR1004E 960H, User Manual

Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands