ALIBI ALI-DVR1004E 960H User Manual Download

Page: 48 / 116

d. When the Attention window opens, click

Yes

3. To disable Manual Record:

a. Select

Record

on the left menu frame.

b. Click the status button before camera number to change the label from

OFF

c. Click the icon after

Normal

Motion Detection

d. When the Attention window opens, click

NOTE

Green “

” icon means that the channel is configured with a record schedule.

If the DVR is rebooted, manual record operations are canceled.

5.1.5 Files Protection

You can lock the recorded files or set the HDD property to Read-only to protect the record files from being overwritten.

1. Open the

Export

menu. Go to

Menu | Export

SECTION 5: RECORD, PLAYBACK AND VIDEO BACKUP

Summary of Contents for ALI-DVR1004E 960H





















































































































Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands

ALIBI ALI-DVR1004E 960H, User Manual

Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands