ALIBI ALI-DVR1004E 960H User Manual Download Page 30

Page: 30 / 116

Click

Pause to temporarily stop the scan, and click

Cancel

to end the scan.

Click

Error info

to see the detailed damage information.

2.8 Configuring Exception Alarms

The DVR monitors for and respond to certain system-related alarm conditions (exception alarms). Monitoring for and response to
these exceptions are configurable.

Exception alarm conditions include:

•

HDD Full

: The HDD is full.

•

HDD Error

: Writing HDD error or unformatted HDD.

•

Network Disconnected

: Disconnected network cable.

•

IP Conflicted

: Duplicated IP address.

•

Illegal Login

: Incorrect user ID or password.

•

Input/Output Video Standards Mismatch

: I/O video standards do not match.

•

Record Exception

: No space exists for saving recorded files.

Responses to exception alarms include:

•

Audible Warning

: Trigger an audible beep when an alarm is detected.

•

Send Email

: Send an email with alarm information to a user or users when an alarm is detected.

SECTION 2: INSTALLING THE SYSTEM

Summary of Contents for ALI-DVR1004E 960H





















































































































Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands

ALIBI ALI-DVR1004E 960H, User Manual

Search results

Summary of Contents for ALI-DVR1004E 960H

Reviews:

Related manuals for ALI-DVR1004E 960H

Brands by name

Popular brands